Click to enlarge

|

This Z-dimming Wave.Me Mountableconsists Flush-standard hardware DUWI Z-Wave, but located with a Z-Wave.Me enhanced firmware. The box pattress Flush-mountable Manufacturer's Duwi is intended to control lamps, both with resistive or inductive load. A pattress box is required for installation. The insert has two buttons. , In order to use them for local control of Flush-Mountable needs to be completed with a paddle switch and a mounting structure for a series of switching Duwis "Everlux" or "Arcade". The unit is designed for use within a 2-wire system, which means that no neutral wire (blue) is required for operations. It will be included in a controlled Z-Wave network from a remote control, a wireless control center or any other Z-Wave controller device including a PC software.The-tip is a conventional phase control dimmer with support for inductive loads such as transformers. Besides conventional resistive loads such as incandescent or halogen lamps 230 V can also be regulated.
Compared with the standard firmware Duwi this product offers a number of important improvements.
• Works well in networks controlled by an IP gateway
the state changes are reported to the IP gateway in real time
switching the blades can be used to control the gateway scenes
• Implements the latest advances in technology Z-Wave Explorer frames to include extensive network and automated network reconfiguration
• Improved routing algorithm for faster communication
• Prevention of "Ghost Nodes" after controller reset
More advanced features include
• Night Light configurable
• Three groups of association (single click, double click, change of status)
• Paddle switch can be used for independent control of local operations
Technical data:
• Power rating: 230 V, 50 Hz
• Wiring: 2-wire system
• Maximum load:
The Incandescent: 40 ... 300W
the 230V halogen (HV): 40 ... 300W
halogen low voltage transformer standard (inductive load): 30 ... 300VA
halogen low voltage switching power (reactive load): No
The Fluorescent Light: 30 ... 300VA, only dimmable lamps
• Behavior wireless: receiver
• Z-Wave type: slave
• Installation: pattress box
• Distance: up to 30 m in buildings
• Display: LED multicolor-
• Interaction: two buttons to complete with paddle switch for local operation
• Power supply: 230 V via
• Dimensions: 48mmx48mmx23mm

Reference: ZME_06433
Manufacturer: Z_Wave
Family: Dimmer